Water decals

HomeWater decals

Sliders/Water decals FASHION NAILS

Select categorySliders/Water decals FASHION NAILS

Stickers for tips

Select categoryStickers for tips

Sliders/Water decals by Anna Tkacheva

Select categorySliders/Water decals by Anna Tkacheva

Stickers 3D

Select categoryStickers 3D

ANNA TKACHEVA Slider 3D Crystal HT3D791, 1 pc

ANNA TKACHEVA Slider 3D Crystal HT3D791, 1 pc

In stock

CODE:AT3DCR0791

Brand: Anna Tkacheva, Collection: 3D Crystal by Anna Tkacheva, Producing country: Russia, Theme: Summer, Flowers, Weight: 2.5 gr

ANNA TKACHEVA Slider 3D Crystal HT3D791, 1 pc. Instructions for Use: 1.Make a standard preparation of the nail plate. 2.Select the appropriate model, cut the image to the size of the nail. 3.Apply the base, dry in the lamp. Apply a thin layer of the white semipermanent, if required by the design of the water decal. Polymerize in a lamp. 4.Apply a thin layer of the base. Do not polymerize in the lamp. 5.Put the water decal on a cotton disk moistened with warm water (not cold!) For about 10-15 seconds. Move it by transferring the film onto the nail. Straighten the film, pulling the free edge slightly upwards. Carefully lay down the folds,...

Brand: Anna Tkacheva

Collection: 3D Crystal by Anna Tkacheva

Producing country: Russia

Theme: Summer, Flowers

Weight: 2.5 gr

$1⁴⁷

Quantity:

+ −

Add to cart

ANNA TKACHEVA Slider 3D Crystal HT3D792, 1 pc

ANNA TKACHEVA Slider 3D Crystal HT3D792, 1 pc

In stock

CODE:AT3DCR0792

Brand: Anna Tkacheva, Collection: 3D Crystal by Anna Tkacheva, Producing country: Russia, Theme: Summer, Flowers, Weight: 2.5 gr

ANNA TKACHEVA Slider 3D Crystal HT3D792, 1 pc. Instructions for Use: 1.Make a standard preparation of the nail plate. 2.Select the appropriate model, cut the image to the size of the nail. 3.Apply the base, dry in the lamp. Apply a thin layer of the white semipermanent, if required by the design of the water decal. Polymerize in a lamp. 4.Apply a thin layer of the base. Do not polymerize in the lamp. 5.Put the water decal on a cotton disk moistened with warm water (not cold!) For about 10-15 seconds. Move it by transferring the film onto the nail. Straighten the film, pulling the free edge slightly upwards. Carefully lay down the folds,...

Brand: Anna Tkacheva

Collection: 3D Crystal by Anna Tkacheva

Producing country: Russia

Theme: Summer, Flowers

Weight: 2.5 gr

$1⁴⁷

Quantity:

+ −

Add to cart

ANNA TKACHEVA Slider 3D Crystal HT3D793, 1 pc

ANNA TKACHEVA Slider 3D Crystal HT3D793, 1 pc

In stock

CODE:AT3DCR0793

Brand: Anna Tkacheva, Collection: 3D Crystal by Anna Tkacheva, Producing country: Russia, Theme: Summer, Flowers, Weight: 2.5 gr

ANNA TKACHEVA Slider 3D Crystal HT3D793, 1 pc. Instructions for Use: 1.Make a standard preparation of the nail plate. 2.Select the appropriate model, cut the image to the size of the nail. 3.Apply the base, dry in the lamp. Apply a thin layer of the white semipermanent, if required by the design of the water decal. Polymerize in a lamp. 4.Apply a thin layer of the base. Do not polymerize in the lamp. 5.Put the water decal on a cotton disk moistened with warm water (not cold!) For about 10-15 seconds. Move it by transferring the film onto the nail. Straighten the film, pulling the free edge slightly upwards. Carefully lay down the folds,...

Brand: Anna Tkacheva

Collection: 3D Crystal by Anna Tkacheva

Producing country: Russia

Theme: Summer, Flowers

Weight: 2.5 gr

$1⁴⁷

Quantity:

+ −

Add to cart

ANNA TKACHEVA Slider 3D Crystal ST-001, 1 pc

ANNA TKACHEVA Slider 3D Crystal ST-001, 1 pc

In stock

CODE:ATST001

Brand: Anna Tkacheva, Collection: 3D Crystal by Anna Tkacheva, Producing country: Russia, Theme: Summer, Flowers, Weight: 2.5 gr

ANNA TKACHEVA Slider 3D Crystal ST-001, 1 pc. Instructions for Use: 1.Make a standard preparation of the nail plate. 2.Select the appropriate model, cut the image to the size of the nail. 3.Apply the base, dry in the lamp. Apply a thin layer of the white semipermanent, if required by the design of the water decal. Polymerize in a lamp. 4.Apply a thin layer of the base. Do not polymerize in the lamp. 5.Put the water decal on a cotton disk moistened with warm water (not cold!) For about 10-15 seconds. Move it by transferring the film onto the nail. Straighten the film, pulling the free edge slightly upwards. Carefully lay down the folds,...

Brand: Anna Tkacheva

Collection: 3D Crystal by Anna Tkacheva

Producing country: Russia

Theme: Summer, Flowers

Weight: 2.5 gr

$1⁴⁷

Quantity:

+ −

Add to cart

ANNA TKACHEVA Slider 3D Crystal ST-002, 1 pc

ANNA TKACHEVA Slider 3D Crystal ST-002, 1 pc

In stock

CODE:ATST002

Brand: Anna Tkacheva, Collection: 3D Crystal by Anna Tkacheva, Producing country: Russia, Theme: Summer, Flowers, Weight: 2.5 gr

ANNA TKACHEVA Slider 3D Crystal ST-002, 1 pc. Instructions for Use: 1.Make a standard preparation of the nail plate. 2.Select the appropriate model, cut the image to the size of the nail. 3.Apply the base, dry in the lamp. Apply a thin layer of the white semipermanent, if required by the design of the water decal. Polymerize in a lamp. 4.Apply a thin layer of the base. Do not polymerize in the lamp. 5.Put the water decal on a cotton disk moistened with warm water (not cold!) For about 10-15 seconds. Move it by transferring the film onto the nail. Straighten the film, pulling the free edge slightly upwards. Carefully lay down the folds,...

Brand: Anna Tkacheva

Collection: 3D Crystal by Anna Tkacheva

Producing country: Russia

Theme: Summer, Flowers

Weight: 2.5 gr

$1⁴⁷

Quantity:

+ −

Add to cart

ANNA TKACHEVA Slider 3D HT 3D001, 1 pc

ANNA TKACHEVA Slider 3D HT 3D001, 1 pc

In stock

CODE:AT183D001

Brand: Anna Tkacheva, Collection: 3D 18+, Producing country: Russia, Weight: 2.5 gr

ANNA TKACHEVA Slider 3D HT 3D001, 1 pc. Instructions for Use: 1.Make a standard preparation of the nail plate. 2.Select the appropriate model, cut the image to the size of the nail. 3.Apply the base, dry in the lamp. Apply a thin layer of the white semipermanent, if required by the design of the water decal. Polymerize in a lamp. 4.Apply a thin layer of the base. Do not polymerize in the lamp. 5.Put the water decal on a cotton disk moistened with warm water (not cold!) For about 10-15 seconds. Move it by transferring the film onto the nail. Straighten the film, pulling the free edge slightly upwards. Carefully lay down the folds, removing...

Brand: Anna Tkacheva

Collection: 3D 18+

Producing country: Russia

Weight: 2.5 gr

$1⁴⁷

Quantity:

+ −

Add to cart

ANNA TKACHEVA Slider 3D HT 3D002, 1 pc

ANNA TKACHEVA Slider 3D HT 3D002, 1 pc

In stock

CODE:AT183D002

Brand: Anna Tkacheva, Collection: 3D 18+, Producing country: Russia, Weight: 2.5 gr

ANNA TKACHEVA Slider 3D HT 3D002, 1 pc. Instructions for Use: 1.Make a standard preparation of the nail plate. 2.Select the appropriate model, cut the image to the size of the nail. 3.Apply the base, dry in the lamp. Apply a thin layer of the white semipermanent, if required by the design of the water decal. Polymerize in a lamp. 4.Apply a thin layer of the base. Do not polymerize in the lamp. 5.Put the water decal on a cotton disk moistened with warm water (not cold!) For about 10-15 seconds. Move it by transferring the film onto the nail. Straighten the film, pulling the free edge slightly upwards. Carefully lay down the folds, removing...

Brand: Anna Tkacheva

Collection: 3D 18+

Producing country: Russia

Weight: 2.5 gr

$1⁴⁷

Quantity:

+ −

Add to cart

ANNA TKACHEVA Slider 3D HT 3D003, 1 pc

ANNA TKACHEVA Slider 3D HT 3D003, 1 pc

In stock

CODE:AT183D003

Brand: Anna Tkacheva, Collection: 3D 18+, Producing country: Russia, Weight: 2.5 gr

ANNA TKACHEVA Slider 3D HT 3D003, 1 pc. Instructions for Use: 1.Make a standard preparation of the nail plate. 2.Select the appropriate model, cut the image to the size of the nail. 3.Apply the base, dry in the lamp. Apply a thin layer of the white semipermanent, if required by the design of the water decal. Polymerize in a lamp. 4.Apply a thin layer of the base. Do not polymerize in the lamp. 5.Put the water decal on a cotton disk moistened with warm water (not cold!) For about 10-15 seconds. Move it by transferring the film onto the nail. Straighten the film, pulling the free edge slightly upwards. Carefully lay down the folds, removing...

Brand: Anna Tkacheva

Collection: 3D 18+

Producing country: Russia

Weight: 2.5 gr

$1⁴⁷

Quantity:

+ −

Add to cart

ANNA TKACHEVA Slider 3D HT 3D004, 1 pc

ANNA TKACHEVA Slider 3D HT 3D004, 1 pc

In stock

CODE:AT183D004

Brand: Anna Tkacheva, Collection: 3D 18+, Producing country: Russia, Weight: 2.5 gr

ANNA TKACHEVA Slider 3D HT 3D004, 1 pc. Instructions for Use: 1.Make a standard preparation of the nail plate. 2.Select the appropriate model, cut the image to the size of the nail. 3.Apply the base, dry in the lamp. Apply a thin layer of the white semipermanent, if required by the design of the water decal. Polymerize in a lamp. 4.Apply a thin layer of the base. Do not polymerize in the lamp. 5.Put the water decal on a cotton disk moistened with warm water (not cold!) For about 10-15 seconds. Move it by transferring the film onto the nail. Straighten the film, pulling the free edge slightly upwards. Carefully lay down the folds, removing...

Brand: Anna Tkacheva

Collection: 3D 18+

Producing country: Russia

Weight: 2.5 gr

$1⁴⁷

Quantity:

+ −

Add to cart

ANNA TKACHEVA Slider 3D HT 3D005, 1 pc

ANNA TKACHEVA Slider 3D HT 3D005, 1 pc

In stock

CODE:AT183D005

Brand: Anna Tkacheva, Collection: 3D 18+, Producing country: Russia, Weight: 2.5 gr

ANNA TKACHEVA Slider 3D HT 3D005, 1 pc. Instructions for Use: 1.Make a standard preparation of the nail plate. 2.Select the appropriate model, cut the image to the size of the nail. 3.Apply the base, dry in the lamp. Apply a thin layer of the white semipermanent, if required by the design of the water decal. Polymerize in a lamp. 4.Apply a thin layer of the base. Do not polymerize in the lamp. 5.Put the water decal on a cotton disk moistened with warm water (not cold!) For about 10-15 seconds. Move it by transferring the film onto the nail. Straighten the film, pulling the free edge slightly upwards. Carefully lay down the folds, removing...

Brand: Anna Tkacheva

Collection: 3D 18+

Producing country: Russia

Weight: 2.5 gr

$1⁴⁷

Quantity:

+ −

Add to cart

ANNA TKACHEVA Slider 3D HT 3D006, 1 pc

ANNA TKACHEVA Slider 3D HT 3D006, 1 pc

In stock

CODE:AT183D006

Brand: Anna Tkacheva, Collection: 3D 18+, Producing country: Russia, Weight: 2.5 gr

ANNA TKACHEVA Slider 3D HT 3D006, 1 pc. Instructions for Use: 1.Make a standard preparation of the nail plate. 2.Select the appropriate model, cut the image to the size of the nail. 3.Apply the base, dry in the lamp. Apply a thin layer of the white semipermanent, if required by the design of the water decal. Polymerize in a lamp. 4.Apply a thin layer of the base. Do not polymerize in the lamp. 5.Put the water decal on a cotton disk moistened with warm water (not cold!) For about 10-15 seconds. Move it by transferring the film onto the nail. Straighten the film, pulling the free edge slightly upwards. Carefully lay down the folds, removing...

Brand: Anna Tkacheva

Collection: 3D 18+

Producing country: Russia

Weight: 2.5 gr

$1⁴⁷

Quantity:

+ −

Add to cart

ANNA TKACHEVA Slider 3D HT 3D007, 1 pc

ANNA TKACHEVA Slider 3D HT 3D007, 1 pc

In stock

CODE:AT183D007

Brand: Anna Tkacheva, Collection: 3D 18+, Producing country: Russia, Weight: 2.5 gr

ANNA TKACHEVA Slider 3D HT 3D007, 1 pc. Instructions for Use: 1.Make a standard preparation of the nail plate. 2.Select the appropriate model, cut the image to the size of the nail. 3.Apply the base, dry in the lamp. Apply a thin layer of the white semipermanent, if required by the design of the water decal. Polymerize in a lamp. 4.Apply a thin layer of the base. Do not polymerize in the lamp. 5.Put the water decal on a cotton disk moistened with warm water (not cold!) For about 10-15 seconds. Move it by transferring the film onto the nail. Straighten the film, pulling the free edge slightly upwards. Carefully lay down the folds, removing...

Brand: Anna Tkacheva

Collection: 3D 18+

Producing country: Russia

Weight: 2.5 gr

$1⁴⁷

Quantity:

+ −

Add to cart

ANNA TKACHEVA Slider 3D HT 3D008, 1 pc

ANNA TKACHEVA Slider 3D HT 3D008, 1 pc

In stock

CODE:AT183D008

Brand: Anna Tkacheva, Collection: 3D 18+, Producing country: Russia, Weight: 2.5 gr

ANNA TKACHEVA Slider 3D HT 3D008, 1 pc. Instructions for Use: 1.Make a standard preparation of the nail plate. 2.Select the appropriate model, cut the image to the size of the nail. 3.Apply the base, dry in the lamp. Apply a thin layer of the white semipermanent, if required by the design of the water decal. Polymerize in a lamp. 4.Apply a thin layer of the base. Do not polymerize in the lamp. 5.Put the water decal on a cotton disk moistened with warm water (not cold!) For about 10-15 seconds. Move it by transferring the film onto the nail. Straighten the film, pulling the free edge slightly upwards. Carefully lay down the folds, removing...

Brand: Anna Tkacheva

Collection: 3D 18+

Producing country: Russia

Weight: 2.5 gr

$1⁴⁷

Quantity:

+ −

Add to cart

ANNA TKACHEVA Slider 3D HT 3D101, 1 pc

ANNA TKACHEVA Slider 3D HT 3D101, 1 pc

In stock

CODE:AT183D101

Brand: Anna Tkacheva, Collection: 3D 18+, Producing country: Russia, Weight: 2.5 gr

ANNA TKACHEVA Slider 3D HT 3D101, 1 pc. Instructions for Use: 1.Make a standard preparation of the nail plate. 2.Select the appropriate model, cut the image to the size of the nail. 3.Apply the base, dry in the lamp. Apply a thin layer of the white semipermanent, if required by the design of the water decal. Polymerize in a lamp. 4.Apply a thin layer of the base. Do not polymerize in the lamp. 5.Put the water decal on a cotton disk moistened with warm water (not cold!) For about 10-15 seconds. Move it by transferring the film onto the nail. Straighten the film, pulling the free edge slightly upwards. Carefully lay down the folds, removing...

Brand: Anna Tkacheva

Collection: 3D 18+

Producing country: Russia

Weight: 2.5 gr

$1⁴⁷

Quantity:

+ −

Add to cart

ANNA TKACHEVA Slider 3D HT 3D102, 1 pc

ANNA TKACHEVA Slider 3D HT 3D102, 1 pc

In stock

CODE:AT183D102

Brand: Anna Tkacheva, Collection: 3D 18+, Producing country: Russia, Weight: 2.5 gr

ANNA TKACHEVA Slider 3D HT 3D102, 1 pc. Instructions for Use: 1.Make a standard preparation of the nail plate. 2.Select the appropriate model, cut the image to the size of the nail. 3.Apply the base, dry in the lamp. Apply a thin layer of the white semipermanent, if required by the design of the water decal. Polymerize in a lamp. 4.Apply a thin layer of the base. Do not polymerize in the lamp. 5.Put the water decal on a cotton disk moistened with warm water (not cold!) For about 10-15 seconds. Move it by transferring the film onto the nail. Straighten the film, pulling the free edge slightly upwards. Carefully lay down the folds, removing...

Brand: Anna Tkacheva

Collection: 3D 18+

Producing country: Russia

Weight: 2.5 gr

$1⁴⁷

Quantity:

+ −

Add to cart

ANNA TKACHEVA Slider 3D HT 3D103, 1 pc

ANNA TKACHEVA Slider 3D HT 3D103, 1 pc

In stock

CODE:AT183D103

Brand: Anna Tkacheva, Collection: 3D 18+, Producing country: Russia, Weight: 2.5 gr

ANNA TKACHEVA Slider 3D HT 3D103, 1 pc. Instructions for Use: 1.Make a standard preparation of the nail plate. 2.Select the appropriate model, cut the image to the size of the nail. 3.Apply the base, dry in the lamp. Apply a thin layer of the white semipermanent, if required by the design of the water decal. Polymerize in a lamp. 4.Apply a thin layer of the base. Do not polymerize in the lamp. 5.Put the water decal on a cotton disk moistened with warm water (not cold!) For about 10-15 seconds. Move it by transferring the film onto the nail. Straighten the film, pulling the free edge slightly upwards. Carefully lay down the folds, removing...

Brand: Anna Tkacheva

Collection: 3D 18+

Producing country: Russia

Weight: 2.5 gr

$1⁴⁷

Quantity:

+ −

Add to cart

ANNA TKACHEVA Slider 3D HT 3D104, 1 pc

ANNA TKACHEVA Slider 3D HT 3D104, 1 pc

In stock

CODE:AT183D104

Brand: Anna Tkacheva, Collection: 3D 18+, Producing country: Russia, Weight: 2.5 gr

ANNA TKACHEVA Slider 3D HT 3D104, 1 pc. Instructions for Use: 1.Make a standard preparation of the nail plate. 2.Select the appropriate model, cut the image to the size of the nail. 3.Apply the base, dry in the lamp. Apply a thin layer of the white semipermanent, if required by the design of the water decal. Polymerize in a lamp. 4.Apply a thin layer of the base. Do not polymerize in the lamp. 5.Put the water decal on a cotton disk moistened with warm water (not cold!) For about 10-15 seconds. Move it by transferring the film onto the nail. Straighten the film, pulling the free edge slightly upwards. Carefully lay down the folds, removing...

Brand: Anna Tkacheva

Collection: 3D 18+

Producing country: Russia

Weight: 2.5 gr

$1⁴⁷

Quantity:

+ −

Add to cart

ANNA TKACHEVA Slider AR-01 black, 1 pc

ANNA TKACHEVA Slider AR-01 black, 1 pc

In stock

CODE:ATAR001B

Brand: Anna Tkacheva, Collection: AERO by Anna Tkacheva, Producing country: Russia, Theme: Flowers, Weight: 2.5 gr

ANNA TKACHEVA Slider AR-01 black, 1 pc. Instructions for Use: 1.Make a standard preparation of the nail plate. 2.Select the appropriate model, cut the image to the size of the nail. 3.Apply the base, dry in the lamp. Apply a thin layer of the white semipermanent, if required by the design of the water decal. Polymerize in a lamp. 4.Apply a thin layer of the base. Do not polymerize in the lamp. 5.Put the water decal on a cotton disk moistened with warm water (not cold!) For about 10-15 seconds. Move it by transferring the film onto the nail. Straighten the film, pulling the free edge slightly upwards. Carefully lay down the folds, removing...

Brand: Anna Tkacheva

Collection: AERO by Anna Tkacheva

Producing country: Russia

Theme: Flowers

Weight: 2.5 gr

$0⁹⁴

Quantity:

+ −

Add to cart

ANNA TKACHEVA Slider AR-01 white, 1 pc

ANNA TKACHEVA Slider AR-01 white, 1 pc

In stock

CODE:ATAR001W

Brand: Anna Tkacheva, Collection: AERO by Anna Tkacheva, Producing country: Russia, Theme: Flowers, Weight: 2.5 gr

ANNA TKACHEVA Slider AR-01 white, 1 pc. Instructions for Use: 1.Make a standard preparation of the nail plate. 2.Select the appropriate model, cut the image to the size of the nail. 3.Apply the base, dry in the lamp. Apply a thin layer of the white semipermanent, if required by the design of the water decal. Polymerize in a lamp. 4.Apply a thin layer of the base. Do not polymerize in the lamp. 5.Put the water decal on a cotton disk moistened with warm water (not cold!) For about 10-15 seconds. Move it by transferring the film onto the nail. Straighten the film, pulling the free edge slightly upwards. Carefully lay down the folds, removing...

Brand: Anna Tkacheva

Collection: AERO by Anna Tkacheva

Producing country: Russia

Theme: Flowers

Weight: 2.5 gr

$0⁹⁴

Quantity:

+ −

Add to cart

ANNA TKACHEVA Slider AR-03 black, 1 pc

ANNA TKACHEVA Slider AR-03 black, 1 pc

In stock

CODE:ATAR003B

Brand: Anna Tkacheva, Collection: AERO by Anna Tkacheva, Producing country: Russia, Theme: Wenzel, Weight: 2.5 gr

ANNA TKACHEVA Slider AR-03 black, 1 pc. Instructions for Use: 1.Make a standard preparation of the nail plate. 2.Select the appropriate model, cut the image to the size of the nail. 3.Apply the base, dry in the lamp. Apply a thin layer of the white semipermanent, if required by the design of the water decal. Polymerize in a lamp. 4.Apply a thin layer of the base. Do not polymerize in the lamp. 5.Put the water decal on a cotton disk moistened with warm water (not cold!) For about 10-15 seconds. Move it by transferring the film onto the nail. Straighten the film, pulling the free edge slightly upwards. Carefully lay down the folds, removing...

Brand: Anna Tkacheva

Collection: AERO by Anna Tkacheva

Producing country: Russia

Theme: Wenzel

Weight: 2.5 gr

$0⁹⁴

Quantity:

+ −

Add to cart

ANNA TKACHEVA Slider AR-03 white, 1 pc

ANNA TKACHEVA Slider AR-03 white, 1 pc

In stock

CODE:ATAR003W

Brand: Anna Tkacheva, Collection: AERO by Anna Tkacheva, Producing country: Russia, Theme: Wenzel, Weight: 2.5 gr

ANNA TKACHEVA Slider AR-03 white, 1 pc. Instructions for Use: 1.Make a standard preparation of the nail plate. 2.Select the appropriate model, cut the image to the size of the nail. 3.Apply the base, dry in the lamp. Apply a thin layer of the white semipermanent, if required by the design of the water decal. Polymerize in a lamp. 4.Apply a thin layer of the base. Do not polymerize in the lamp. 5.Put the water decal on a cotton disk moistened with warm water (not cold!) For about 10-15 seconds. Move it by transferring the film onto the nail. Straighten the film, pulling the free edge slightly upwards. Carefully lay down the folds, removing...

Brand: Anna Tkacheva

Collection: AERO by Anna Tkacheva

Producing country: Russia

Theme: Wenzel

Weight: 2.5 gr

$0⁹⁴

Quantity:

+ −

Add to cart

ANNA TKACHEVA Slider AR-04, 1 pc

ANNA TKACHEVA Slider AR-04, 1 pc

In stock

CODE:ATAR004

Brand: Anna Tkacheva, Collection: AERO by Anna Tkacheva, Producing country: Russia, Theme: Sea / Shells, Weight: 2.5 gr

ANNA TKACHEVA Slider AR-04, 1 pc. Instructions for Use: 1.Make a standard preparation of the nail plate. 2.Select the appropriate model, cut the image to the size of the nail. 3.Apply the base, dry in the lamp. Apply a thin layer of the white semipermanent, if required by the design of the water decal. Polymerize in a lamp. 4.Apply a thin layer of the base. Do not polymerize in the lamp. 5.Put the water decal on a cotton disk moistened with warm water (not cold!) For about 10-15 seconds. Move it by transferring the film onto the nail. Straighten the film, pulling the free edge slightly upwards. Carefully lay down the folds, removing the...

Brand: Anna Tkacheva

Collection: AERO by Anna Tkacheva

Producing country: Russia

Theme: Sea / Shells

Weight: 2.5 gr

$0⁹⁴

Quantity:

+ −

Add to cart

ANNA TKACHEVA Slider AR-05 black, 1 pc

ANNA TKACHEVA Slider AR-05 black, 1 pc

In stock

CODE:ATAR005B

Brand: Anna Tkacheva, Collection: AERO by Anna Tkacheva, Producing country: Russia, Theme: Flowers, Weight: 2.5 gr

ANNA TKACHEVA Slider AR-05 black, 1 pc. Instructions for Use: 1.Make a standard preparation of the nail plate. 2.Select the appropriate model, cut the image to the size of the nail. 3.Apply the base, dry in the lamp. Apply a thin layer of the white semipermanent, if required by the design of the water decal. Polymerize in a lamp. 4.Apply a thin layer of the base. Do not polymerize in the lamp. 5.Put the water decal on a cotton disk moistened with warm water (not cold!) For about 10-15 seconds. Move it by transferring the film onto the nail. Straighten the film, pulling the free edge slightly upwards. Carefully lay down the folds, removing...

Brand: Anna Tkacheva

Collection: AERO by Anna Tkacheva

Producing country: Russia

Theme: Flowers

Weight: 2.5 gr

$0⁹⁴

Quantity:

+ −

Add to cart

ANNA TKACHEVA Slider AR-05 white, 1 pc

ANNA TKACHEVA Slider AR-05 white, 1 pc

In stock

CODE:ATAR005W

Brand: Anna Tkacheva, Collection: AERO by Anna Tkacheva, Producing country: Russia, Theme: Flowers, Weight: 2.5 gr

ANNA TKACHEVA Slider AR-05 white, 1 pc. Instructions for Use: 1.Make a standard preparation of the nail plate. 2.Select the appropriate model, cut the image to the size of the nail. 3.Apply the base, dry in the lamp. Apply a thin layer of the white semipermanent, if required by the design of the water decal. Polymerize in a lamp. 4.Apply a thin layer of the base. Do not polymerize in the lamp. 5.Put the water decal on a cotton disk moistened with warm water (not cold!) For about 10-15 seconds. Move it by transferring the film onto the nail. Straighten the film, pulling the free edge slightly upwards. Carefully lay down the folds, removing...

Brand: Anna Tkacheva

Collection: AERO by Anna Tkacheva

Producing country: Russia

Theme: Flowers

Weight: 2.5 gr

$0⁹⁴

Quantity:

+ −

Add to cart

ANNA TKACHEVA Slider AR-06 black, 1 pc

ANNA TKACHEVA Slider AR-06 black, 1 pc

In stock

CODE:ATAR006B

Brand: Anna Tkacheva, Collection: AERO by Anna Tkacheva, Producing country: Russia, Theme: Flowers, Weight: 2.5 gr

ANNA TKACHEVA Slider AR-06 black, 1 pc. Instructions for Use: 1.Make a standard preparation of the nail plate. 2.Select the appropriate model, cut the image to the size of the nail. 3.Apply the base, dry in the lamp. Apply a thin layer of the white semipermanent, if required by the design of the water decal. Polymerize in a lamp. 4.Apply a thin layer of the base. Do not polymerize in the lamp. 5.Put the water decal on a cotton disk moistened with warm water (not cold!) For about 10-15 seconds. Move it by transferring the film onto the nail. Straighten the film, pulling the free edge slightly upwards. Carefully lay down the folds, removing...

Brand: Anna Tkacheva

Collection: AERO by Anna Tkacheva

Producing country: Russia

Theme: Flowers

Weight: 2.5 gr

$0⁹⁴

Quantity:

+ −

Add to cart

ANNA TKACHEVA Slider AR-06 white, 1 pc

ANNA TKACHEVA Slider AR-06 white, 1 pc

In stock

CODE:ATAR006W

Brand: Anna Tkacheva, Collection: AERO by Anna Tkacheva, Producing country: Russia, Theme: Flowers, Weight: 2.5 gr

ANNA TKACHEVA Slider AR-06 white, 1 pc. Instructions for Use: 1.Make a standard preparation of the nail plate. 2.Select the appropriate model, cut the image to the size of the nail. 3.Apply the base, dry in the lamp. Apply a thin layer of the white semipermanent, if required by the design of the water decal. Polymerize in a lamp. 4.Apply a thin layer of the base. Do not polymerize in the lamp. 5.Put the water decal on a cotton disk moistened with warm water (not cold!) For about 10-15 seconds. Move it by transferring the film onto the nail. Straighten the film, pulling the free edge slightly upwards. Carefully lay down the folds, removing...

Brand: Anna Tkacheva

Collection: AERO by Anna Tkacheva

Producing country: Russia

Theme: Flowers

Weight: 2.5 gr

$0⁹⁴

Quantity:

+ −

Add to cart

ANNA TKACHEVA Slider AR-07, 1 pc

ANNA TKACHEVA Slider AR-07, 1 pc

In stock

CODE:ATAR007

Brand: Anna Tkacheva, Collection: AERO by Anna Tkacheva, Producing country: Russia, Theme: Hearts, Weight: 2.5 gr

ANNA TKACHEVA Slider AR-07, 1 pc. Instructions for Use: 1.Make a standard preparation of the nail plate. 2.Select the appropriate model, cut the image to the size of the nail. 3.Apply the base, dry in the lamp. Apply a thin layer of the white semipermanent, if required by the design of the water decal. Polymerize in a lamp. 4.Apply a thin layer of the base. Do not polymerize in the lamp. 5.Put the water decal on a cotton disk moistened with warm water (not cold!) For about 10-15 seconds. Move it by transferring the film onto the nail. Straighten the film, pulling the free edge slightly upwards. Carefully lay down the folds, removing the...

Brand: Anna Tkacheva

Collection: AERO by Anna Tkacheva

Producing country: Russia

Theme: Hearts

Weight: 2.5 gr

$0⁹⁴

Quantity:

+ −

Add to cart

ANNA TKACHEVA Slider AR-08 black, 1 pc

ANNA TKACHEVA Slider AR-08 black, 1 pc

In stock

CODE:ATAR008B

Brand: Anna Tkacheva, Collection: AERO by Anna Tkacheva, Producing country: Russia, Theme: Flowers, Weight: 2.5 gr

ANNA TKACHEVA Slider AR-08 black, 1 pc. Instructions for Use: 1.Make a standard preparation of the nail plate. 2.Select the appropriate model, cut the image to the size of the nail. 3.Apply the base, dry in the lamp. Apply a thin layer of the white semipermanent, if required by the design of the water decal. Polymerize in a lamp. 4.Apply a thin layer of the base. Do not polymerize in the lamp. 5.Put the water decal on a cotton disk moistened with warm water (not cold!) For about 10-15 seconds. Move it by transferring the film onto the nail. Straighten the film, pulling the free edge slightly upwards. Carefully lay down the folds, removing...

Brand: Anna Tkacheva

Collection: AERO by Anna Tkacheva

Producing country: Russia

Theme: Flowers

Weight: 2.5 gr

$0⁹⁴

Quantity:

+ −

Add to cart

ANNA TKACHEVA Slider AR-08 white, 1 pc

ANNA TKACHEVA Slider AR-08 white, 1 pc

In stock

CODE:ATAR008W

Brand: Anna Tkacheva, Collection: AERO by Anna Tkacheva, Producing country: Russia, Theme: Flowers, Weight: 2.5 gr

ANNA TKACHEVA Slider AR-08 white, 1 pc. Instructions for Use: 1.Make a standard preparation of the nail plate. 2.Select the appropriate model, cut the image to the size of the nail. 3.Apply the base, dry in the lamp. Apply a thin layer of the white semipermanent, if required by the design of the water decal. Polymerize in a lamp. 4.Apply a thin layer of the base. Do not polymerize in the lamp. 5.Put the water decal on a cotton disk moistened with warm water (not cold!) For about 10-15 seconds. Move it by transferring the film onto the nail. Straighten the film, pulling the free edge slightly upwards. Carefully lay down the folds, removing...

Brand: Anna Tkacheva

Collection: AERO by Anna Tkacheva

Producing country: Russia

Theme: Flowers

Weight: 2.5 gr

$0⁹⁴

Quantity:

+ −

Add to cart

ANNA TKACHEVA Slider AR-09, 1 pc

ANNA TKACHEVA Slider AR-09, 1 pc

In stock

CODE:ATAR009

Brand: Anna Tkacheva, Collection: AERO by Anna Tkacheva, Producing country: Russia, Theme: Gradient, Flowers, Weight: 2.5 gr

ANNA TKACHEVA Slider AR-09, 1 pc. Instructions for Use: 1.Make a standard preparation of the nail plate. 2.Select the appropriate model, cut the image to the size of the nail. 3.Apply the base, dry in the lamp. Apply a thin layer of the white semipermanent, if required by the design of the water decal. Polymerize in a lamp. 4.Apply a thin layer of the base. Do not polymerize in the lamp. 5.Put the water decal on a cotton disk moistened with warm water (not cold!) For about 10-15 seconds. Move it by transferring the film onto the nail. Straighten the film, pulling the free edge slightly upwards. Carefully lay down the folds, removing the...

Brand: Anna Tkacheva

Collection: AERO by Anna Tkacheva

Producing country: Russia

Theme: Gradient, Flowers

Weight: 2.5 gr

$0⁹⁴

Quantity:

+ −

Add to cart

ANNA TKACHEVA Slider AR-10, 1 pc

ANNA TKACHEVA Slider AR-10, 1 pc

Out of stock

CODE:ATAR010

Brand: Anna Tkacheva, Collection: AERO by Anna Tkacheva, Producing country: Russia, Theme: Winter, Weight: 2.5 gr

ANNA TKACHEVA Slider AR-10, 1 pc. Instructions for Use: 1.Make a standard preparation of the nail plate. 2.Select the appropriate model, cut the image to the size of the nail. 3.Apply the base, dry in the lamp. Apply a thin layer of the white semipermanent, if required by the design of the water decal. Polymerize in a lamp. 4.Apply a thin layer of the base. Do not polymerize in the lamp. 5.Put the water decal on a cotton disk moistened with warm water (not cold!) For about 10-15 seconds. Move it by transferring the film onto the nail. Straighten the film, pulling the free edge slightly upwards. Carefully lay down the folds, removing the...

Brand: Anna Tkacheva

Collection: AERO by Anna Tkacheva

Producing country: Russia

Theme: Winter

Weight: 2.5 gr

$0⁹⁴

Out of stock

ANNA TKACHEVA Slider AR-11, 1 pc

ANNA TKACHEVA Slider AR-11, 1 pc

In stock

CODE:ATAR011

Brand: Anna Tkacheva, Collection: AERO by Anna Tkacheva, Producing country: Russia, Theme: Flowers, Weight: 2.5 gr

ANNA TKACHEVA Slider AR-11, 1 pc. Instructions for Use: 1.Make a standard preparation of the nail plate. 2.Select the appropriate model, cut the image to the size of the nail. 3.Apply the base, dry in the lamp. Apply a thin layer of the white semipermanent, if required by the design of the water decal. Polymerize in a lamp. 4.Apply a thin layer of the base. Do not polymerize in the lamp. 5.Put the water decal on a cotton disk moistened with warm water (not cold!) For about 10-15 seconds. Move it by transferring the film onto the nail. Straighten the film, pulling the free edge slightly upwards. Carefully lay down the folds, removing the...

Brand: Anna Tkacheva

Collection: AERO by Anna Tkacheva

Producing country: Russia

Theme: Flowers

Weight: 2.5 gr

$0⁹⁴

Quantity:

+ −

Add to cart

ANNA TKACHEVA Slider AR-14, 1 pc

ANNA TKACHEVA Slider AR-14, 1 pc

In stock

CODE:ATAR014

Brand: Anna Tkacheva, Collection: AERO by Anna Tkacheva, Producing country: Russia, Theme: Gradient, Weight: 2.5 gr

ANNA TKACHEVA Slider AR-14, 1 pc. Instructions for Use: 1.Make a standard preparation of the nail plate. 2.Select the appropriate model, cut the image to the size of the nail. 3.Apply the base, dry in the lamp. Apply a thin layer of the white semipermanent, if required by the design of the water decal. Polymerize in a lamp. 4.Apply a thin layer of the base. Do not polymerize in the lamp. 5.Put the water decal on a cotton disk moistened with warm water (not cold!) For about 10-15 seconds. Move it by transferring the film onto the nail. Straighten the film, pulling the free edge slightly upwards. Carefully lay down the folds, removing the...

Brand: Anna Tkacheva

Collection: AERO by Anna Tkacheva

Producing country: Russia

Theme: Gradient

Weight: 2.5 gr

$0⁹⁴

Quantity:

+ −

Add to cart

ANNA TKACHEVA Slider AR-15, 1 pc

ANNA TKACHEVA Slider AR-15, 1 pc

In stock

CODE:ATAR015

Brand: Anna Tkacheva, Collection: AERO by Anna Tkacheva, Producing country: Russia, Theme: Gradient, Weight: 2.5 gr

ANNA TKACHEVA Slider AR-15, 1 pc. Instructions for Use: 1.Make a standard preparation of the nail plate. 2.Select the appropriate model, cut the image to the size of the nail. 3.Apply the base, dry in the lamp. Apply a thin layer of the white semipermanent, if required by the design of the water decal. Polymerize in a lamp. 4.Apply a thin layer of the base. Do not polymerize in the lamp. 5.Put the water decal on a cotton disk moistened with warm water (not cold!) For about 10-15 seconds. Move it by transferring the film onto the nail. Straighten the film, pulling the free edge slightly upwards. Carefully lay down the folds, removing the...

Brand: Anna Tkacheva

Collection: AERO by Anna Tkacheva

Producing country: Russia

Theme: Gradient

Weight: 2.5 gr

$0⁹⁴

Quantity:

+ −

Add to cart

ANNA TKACHEVA Slider AR-17, 1 pc

ANNA TKACHEVA Slider AR-17, 1 pc

In stock

CODE:ATAR017

Brand: Anna Tkacheva, Collection: AERO by Anna Tkacheva, Producing country: Russia, Theme: Gradient, Weight: 2.5 gr

ANNA TKACHEVA Slider AR-17, 1 pc. Instructions for Use: 1.Make a standard preparation of the nail plate. 2.Select the appropriate model, cut the image to the size of the nail. 3.Apply the base, dry in the lamp. Apply a thin layer of the white semipermanent, if required by the design of the water decal. Polymerize in a lamp. 4.Apply a thin layer of the base. Do not polymerize in the lamp. 5.Put the water decal on a cotton disk moistened with warm water (not cold!) For about 10-15 seconds. Move it by transferring the film onto the nail. Straighten the film, pulling the free edge slightly upwards. Carefully lay down the folds, removing the...

Brand: Anna Tkacheva

Collection: AERO by Anna Tkacheva

Producing country: Russia

Theme: Gradient

Weight: 2.5 gr

$0⁹⁴

Quantity:

+ −

Add to cart

ANNA TKACHEVA Slider AR-18, 1 pc

ANNA TKACHEVA Slider AR-18, 1 pc

In stock

CODE:ATAR018

Brand: Anna Tkacheva, Collection: AERO by Anna Tkacheva, Producing country: Russia, Theme: Gradient, Weight: 2.5 gr

ANNA TKACHEVA Slider AR-18, 1 pc. Instructions for Use: 1.Make a standard preparation of the nail plate. 2.Select the appropriate model, cut the image to the size of the nail. 3.Apply the base, dry in the lamp. Apply a thin layer of the white semipermanent, if required by the design of the water decal. Polymerize in a lamp. 4.Apply a thin layer of the base. Do not polymerize in the lamp. 5.Put the water decal on a cotton disk moistened with warm water (not cold!) For about 10-15 seconds. Move it by transferring the film onto the nail. Straighten the film, pulling the free edge slightly upwards. Carefully lay down the folds, removing the...

Brand: Anna Tkacheva

Collection: AERO by Anna Tkacheva

Producing country: Russia

Theme: Gradient

Weight: 2.5 gr

$0⁹⁴

Quantity:

+ −

Add to cart

ANNA TKACHEVA Slider AR-21, 1 pc

ANNA TKACHEVA Slider AR-21, 1 pc

In stock

CODE:ATAR021

Brand: Anna Tkacheva, Collection: AERO by Anna Tkacheva, Producing country: Russia, Theme: Gradient, Weight: 2.5 gr

ANNA TKACHEVA Slider AR-21, 1 pc. Instructions for Use: 1.Make a standard preparation of the nail plate. 2.Select the appropriate model, cut the image to the size of the nail. 3.Apply the base, dry in the lamp. Apply a thin layer of the white semipermanent, if required by the design of the water decal. Polymerize in a lamp. 4.Apply a thin layer of the base. Do not polymerize in the lamp. 5.Put the water decal on a cotton disk moistened with warm water (not cold!) For about 10-15 seconds. Move it by transferring the film onto the nail. Straighten the film, pulling the free edge slightly upwards. Carefully lay down the folds, removing the...

Brand: Anna Tkacheva

Collection: AERO by Anna Tkacheva

Producing country: Russia

Theme: Gradient

Weight: 2.5 gr

$0⁹⁴

Quantity:

+ −

Add to cart

ANNA TKACHEVA Slider ЗD 003 black, 1 pc

ANNA TKACHEVA Slider ЗD 003 black, 1 pc

In stock

CODE:AT3DAR003B

Brand: Anna Tkacheva, Collection: 3D by Anna Tkacheva, Producing country: Russia, Theme: Wenzel, Weight: 2.5 gr

ANNA TKACHEVA Slider ЗD 003 black, 1 pc. Instructions for Use: 1.Make a standard preparation of the nail plate. 2.Select the appropriate model, cut the image to the size of the nail. 3.Apply the base, dry in the lamp. Apply a thin layer of the white semipermanent, if required by the design of the water decal. Polymerize in a lamp. 4.Apply a thin layer of the base. Do not polymerize in the lamp. 5.Put the water decal on a cotton disk moistened with warm water (not cold!) For about 10-15 seconds. Move it by transferring the film onto the nail. Straighten the film, pulling the free edge slightly upwards. Carefully lay down the folds, removing...

Brand: Anna Tkacheva

Collection: 3D by Anna Tkacheva

Producing country: Russia

Theme: Wenzel

Weight: 2.5 gr

$1⁴⁷

Quantity:

+ −

Add to cart

ANNA TKACHEVA Slider ЗD 003 white, 1 pc

ANNA TKACHEVA Slider ЗD 003 white, 1 pc

Out of stock

CODE:AT3DAR003W

Brand: Anna Tkacheva, Collection: 3D by Anna Tkacheva, Producing country: Russia, Theme: Wenzel, Weight: 2.5 gr

ANNA TKACHEVA Slider ЗD 003 white, 1 pc. Instructions for Use: 1.Make a standard preparation of the nail plate. 2.Select the appropriate model, cut the image to the size of the nail. 3.Apply the base, dry in the lamp. Apply a thin layer of the white semipermanent, if required by the design of the water decal. Polymerize in a lamp. 4.Apply a thin layer of the base. Do not polymerize in the lamp. 5.Put the water decal on a cotton disk moistened with warm water (not cold!) For about 10-15 seconds. Move it by transferring the film onto the nail. Straighten the film, pulling the free edge slightly upwards. Carefully lay down the folds, removing...

Brand: Anna Tkacheva

Collection: 3D by Anna Tkacheva

Producing country: Russia

Theme: Wenzel

Weight: 2.5 gr

$1⁴⁷

Out of stock

ANNA TKACHEVA Slider ЗD 005 black, 1 pc

ANNA TKACHEVA Slider ЗD 005 black, 1 pc

In stock

CODE:AT3DAR005B

Brand: Anna Tkacheva, Collection: 3D by Anna Tkacheva, Producing country: Russia, Theme: Flowers, Weight: 2.5 gr

ANNA TKACHEVA Slider ЗD 005 black, 1 pc. Instructions for Use: 1.Make a standard preparation of the nail plate. 2.Select the appropriate model, cut the image to the size of the nail. 3.Apply the base, dry in the lamp. Apply a thin layer of the white semipermanent, if required by the design of the water decal. Polymerize in a lamp. 4.Apply a thin layer of the base. Do not polymerize in the lamp. 5.Put the water decal on a cotton disk moistened with warm water (not cold!) For about 10-15 seconds. Move it by transferring the film onto the nail. Straighten the film, pulling the free edge slightly upwards. Carefully lay down the folds, removing...

Brand: Anna Tkacheva

Collection: 3D by Anna Tkacheva

Producing country: Russia

Theme: Flowers

Weight: 2.5 gr

$1⁴⁷

Quantity:

+ −

Add to cart

ANNA TKACHEVA Slider ЗD 005 white, 1 pc

ANNA TKACHEVA Slider ЗD 005 white, 1 pc

In stock

CODE:AT3DAR005W

Brand: Anna Tkacheva, Collection: 3D by Anna Tkacheva, Producing country: Russia, Theme: Flowers, Weight: 2.5 gr

ANNA TKACHEVA Slider ЗD 005 white, 1 pc. Instructions for Use: 1.Make a standard preparation of the nail plate. 2.Select the appropriate model, cut the image to the size of the nail. 3.Apply the base, dry in the lamp. Apply a thin layer of the white semipermanent, if required by the design of the water decal. Polymerize in a lamp. 4.Apply a thin layer of the base. Do not polymerize in the lamp. 5.Put the water decal on a cotton disk moistened with warm water (not cold!) For about 10-15 seconds. Move it by transferring the film onto the nail. Straighten the film, pulling the free edge slightly upwards. Carefully lay down the folds, removing...

Brand: Anna Tkacheva

Collection: 3D by Anna Tkacheva

Producing country: Russia

Theme: Flowers

Weight: 2.5 gr

$1⁴⁷

Quantity:

+ −

Add to cart

ANNA TKACHEVA Slider ЗD 006 black, 1 pc

ANNA TKACHEVA Slider ЗD 006 black, 1 pc

In stock

CODE:AT3DAR006B

Brand: Anna Tkacheva, Collection: 3D by Anna Tkacheva, Producing country: Russia, Theme: Wenzel, Weight: 2.5 gr

ANNA TKACHEVA Slider ЗD 006 black, 1 pc. Instructions for Use: 1.Make a standard preparation of the nail plate. 2.Select the appropriate model, cut the image to the size of the nail. 3.Apply the base, dry in the lamp. Apply a thin layer of the white semipermanent, if required by the design of the water decal. Polymerize in a lamp. 4.Apply a thin layer of the base. Do not polymerize in the lamp. 5.Put the water decal on a cotton disk moistened with warm water (not cold!) For about 10-15 seconds. Move it by transferring the film onto the nail. Straighten the film, pulling the free edge slightly upwards. Carefully lay down the folds, removing...

Brand: Anna Tkacheva

Collection: 3D by Anna Tkacheva

Producing country: Russia

Theme: Wenzel

Weight: 2.5 gr

$1⁴⁷

Quantity:

+ −

Add to cart

ANNA TKACHEVA Slider ЗD 006 white, 1 pc

ANNA TKACHEVA Slider ЗD 006 white, 1 pc

Out of stock

CODE:AT3DAR006W

Brand: Anna Tkacheva, Collection: 3D by Anna Tkacheva, Producing country: Russia, Theme: Wenzel, Weight: 2.5 gr

ANNA TKACHEVA Slider ЗD 006 white, 1 pc. Instructions for Use: 1.Make a standard preparation of the nail plate. 2.Select the appropriate model, cut the image to the size of the nail. 3.Apply the base, dry in the lamp. Apply a thin layer of the white semipermanent, if required by the design of the water decal. Polymerize in a lamp. 4.Apply a thin layer of the base. Do not polymerize in the lamp. 5.Put the water decal on a cotton disk moistened with warm water (not cold!) For about 10-15 seconds. Move it by transferring the film onto the nail. Straighten the film, pulling the free edge slightly upwards. Carefully lay down the folds, removing...

Brand: Anna Tkacheva

Collection: 3D by Anna Tkacheva

Producing country: Russia

Theme: Wenzel

Weight: 2.5 gr

$1⁴⁷

Out of stock

ANNA TKACHEVA Slider ЗD 007 black, 1 pc

ANNA TKACHEVA Slider ЗD 007 black, 1 pc

Out of stock

CODE:AT3DAR007B

Brand: Anna Tkacheva, Collection: 3D by Anna Tkacheva, Producing country: Russia, Theme: Wenzel, Weight: 2.5 gr

ANNA TKACHEVA Slider ЗD 007 black, 1 pc. Instructions for Use: 1.Make a standard preparation of the nail plate. 2.Select the appropriate model, cut the image to the size of the nail. 3.Apply the base, dry in the lamp. Apply a thin layer of the white semipermanent, if required by the design of the water decal. Polymerize in a lamp. 4.Apply a thin layer of the base. Do not polymerize in the lamp. 5.Put the water decal on a cotton disk moistened with warm water (not cold!) For about 10-15 seconds. Move it by transferring the film onto the nail. Straighten the film, pulling the free edge slightly upwards. Carefully lay down the folds, removing...

Brand: Anna Tkacheva

Collection: 3D by Anna Tkacheva

Producing country: Russia

Theme: Wenzel

Weight: 2.5 gr

$1⁴⁷

Out of stock

ANNA TKACHEVA Slider ЗD 007 white, 1 pc

ANNA TKACHEVA Slider ЗD 007 white, 1 pc

Out of stock

CODE:AT3DAR007W

Brand: Anna Tkacheva, Collection: 3D by Anna Tkacheva, Producing country: Russia, Theme: Wenzel, Weight: 2.5 gr

ANNA TKACHEVA Slider ЗD 007 white, 1 pc. Instructions for Use: 1.Make a standard preparation of the nail plate. 2.Select the appropriate model, cut the image to the size of the nail. 3.Apply the base, dry in the lamp. Apply a thin layer of the white semipermanent, if required by the design of the water decal. Polymerize in a lamp. 4.Apply a thin layer of the base. Do not polymerize in the lamp. 5.Put the water decal on a cotton disk moistened with warm water (not cold!) For about 10-15 seconds. Move it by transferring the film onto the nail. Straighten the film, pulling the free edge slightly upwards. Carefully lay down the folds, removing...

Brand: Anna Tkacheva

Collection: 3D by Anna Tkacheva

Producing country: Russia

Theme: Wenzel

Weight: 2.5 gr

$1⁴⁷

Out of stock

ANNA TKACHEVA Slider ЗD 008 black, 1 pc

ANNA TKACHEVA Slider ЗD 008 black, 1 pc

In stock

CODE:AT3DAR008B

Brand: Anna Tkacheva, Collection: 3D by Anna Tkacheva, Producing country: Russia, Theme: Wenzel, Weight: 2.5 gr

ANNA TKACHEVA Slider ЗD 008 black, 1 pc. Instructions for Use: 1.Make a standard preparation of the nail plate. 2.Select the appropriate model, cut the image to the size of the nail. 3.Apply the base, dry in the lamp. Apply a thin layer of the white semipermanent, if required by the design of the water decal. Polymerize in a lamp. 4.Apply a thin layer of the base. Do not polymerize in the lamp. 5.Put the water decal on a cotton disk moistened with warm water (not cold!) For about 10-15 seconds. Move it by transferring the film onto the nail. Straighten the film, pulling the free edge slightly upwards. Carefully lay down the folds, removing...

Brand: Anna Tkacheva

Collection: 3D by Anna Tkacheva

Producing country: Russia

Theme: Wenzel

Weight: 2.5 gr

$1⁴⁷

Quantity:

+ −

Add to cart

ANNA TKACHEVA Slider ЗD 008 white, 1 pc

ANNA TKACHEVA Slider ЗD 008 white, 1 pc

Out of stock

CODE:AT3DAR008W

Brand: Anna Tkacheva, Collection: 3D by Anna Tkacheva, Producing country: Russia, Theme: Wenzel, Weight: 2.5 gr

ANNA TKACHEVA Slider ЗD 008 white, 1 pc. Instructions for Use: 1.Make a standard preparation of the nail plate. 2.Select the appropriate model, cut the image to the size of the nail. 3.Apply the base, dry in the lamp. Apply a thin layer of the white semipermanent, if required by the design of the water decal. Polymerize in a lamp. 4.Apply a thin layer of the base. Do not polymerize in the lamp. 5.Put the water decal on a cotton disk moistened with warm water (not cold!) For about 10-15 seconds. Move it by transferring the film onto the nail. Straighten the film, pulling the free edge slightly upwards. Carefully lay down the folds, removing...

Brand: Anna Tkacheva

Collection: 3D by Anna Tkacheva

Producing country: Russia

Theme: Wenzel

Weight: 2.5 gr

$1⁴⁷

Out of stock

ANNA TKACHEVA Slider ЗD 013 black, 1 pc

ANNA TKACHEVA Slider ЗD 013 black, 1 pc

In stock

CODE:AT3DAR013B

Brand: Anna Tkacheva, Collection: 3D by Anna Tkacheva, Producing country: Russia, Theme: Flowers, Weight: 2.5 gr

ANNA TKACHEVA Slider ЗD 013 black, 1 pc. Instructions for Use: 1.Make a standard preparation of the nail plate. 2.Select the appropriate model, cut the image to the size of the nail. 3.Apply the base, dry in the lamp. Apply a thin layer of the white semipermanent, if required by the design of the water decal. Polymerize in a lamp. 4.Apply a thin layer of the base. Do not polymerize in the lamp. 5.Put the water decal on a cotton disk moistened with warm water (not cold!) For about 10-15 seconds. Move it by transferring the film onto the nail. Straighten the film, pulling the free edge slightly upwards. Carefully lay down the folds, removing...

Brand: Anna Tkacheva

Collection: 3D by Anna Tkacheva

Producing country: Russia

Theme: Flowers

Weight: 2.5 gr

$1⁴⁷

Quantity:

+ −

Add to cart

ANNA TKACHEVA Slider ЗD 013 white, 1 pc

ANNA TKACHEVA Slider ЗD 013 white, 1 pc

In stock

CODE:AT3DAR013W

Brand: Anna Tkacheva, Collection: 3D by Anna Tkacheva, Producing country: Russia, Theme: Flowers, Weight: 2.5 gr

ANNA TKACHEVA Slider ЗD 013 white, 1 pc. Instructions for Use: 1.Make a standard preparation of the nail plate. 2.Select the appropriate model, cut the image to the size of the nail. 3.Apply the base, dry in the lamp. Apply a thin layer of the white semipermanent, if required by the design of the water decal. Polymerize in a lamp. 4.Apply a thin layer of the base. Do not polymerize in the lamp. 5.Put the water decal on a cotton disk moistened with warm water (not cold!) For about 10-15 seconds. Move it by transferring the film onto the nail. Straighten the film, pulling the free edge slightly upwards. Carefully lay down the folds, removing...

Brand: Anna Tkacheva

Collection: 3D by Anna Tkacheva

Producing country: Russia

Theme: Flowers

Weight: 2.5 gr

$1⁴⁷

Quantity:

+ −

Add to cart

ANNA TKACHEVA Slider ЗD 016 black, 1 pc

ANNA TKACHEVA Slider ЗD 016 black, 1 pc

In stock

CODE:AT3DAR016B

Brand: Anna Tkacheva, Collection: 3D by Anna Tkacheva, Producing country: Russia, Theme: Winter, Weight: 2.5 gr

ANNA TKACHEVA Slider ЗD 016 black, 1 pc. Instructions for Use: 1.Make a standard preparation of the nail plate. 2.Select the appropriate model, cut the image to the size of the nail. 3.Apply the base, dry in the lamp. Apply a thin layer of the white semipermanent, if required by the design of the water decal. Polymerize in a lamp. 4.Apply a thin layer of the base. Do not polymerize in the lamp. 5.Put the water decal on a cotton disk moistened with warm water (not cold!) For about 10-15 seconds. Move it by transferring the film onto the nail. Straighten the film, pulling the free edge slightly upwards. Carefully lay down the folds, removing...

Brand: Anna Tkacheva

Collection: 3D by Anna Tkacheva

Producing country: Russia

Theme: Winter

Weight: 2.5 gr

$1⁴⁷

Quantity:

+ −

Add to cart

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Next

Reviews

No data found

Write a review

Happy Customers

Premium Items

Secure Shopping

Buy Anything